* fix(woocommerce): require both verified keys and browser confirmation to activate a connection The wc-auth callback alone used to flip a connection to active. Until the initiator's browser reached the return route the row was syncable, so an approver who never came back (closed tab, skipped sign-in, or lured into approving a connect someone else started) left their store's keys active inside another company's books, reachable by manual sync within seconds. Now the callback only stages the verified keys on the pending row, the return leg records browser_confirmed_at after the initiator check, and one conditional update flips the row to active exactly once when both signals are present, in either arrival order. A DB CHECK (20260907100000) makes an active row without both signals impossible; every consumer selects status = 'active', so staged keys can never sync. Also: 15-minute handshake TTL on both legs, duplicate callback refused, stale pending rows swept (keys wiped) at the start of the nightly orders cron, manual key entry records the confirmation itself, every path that closes a pending row wipes staged keys, expired/conflict toasts in sv + en. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LCnbsjSYtD5uwo7ZqJAMQz * fix(woocommerce): drop the callback-leg TTL and state the gate's real scope Skeptic pass on the activation gate: - WooCommerce answers any non-200 callback response by deleting the key it just minted and showing a store-side error page, never redirecting back. A 410 for a slow approval therefore stranded the merchant. The callback now stages regardless of age; the session-bound return leg and the nightly sweep enforce expiry, and a stale pending row cannot sync either way. - The second activation signal comes from the initiating user, so the gate does not stop a store admin from approving a link someone else generated (wc-auth delivers keys server-to-server and identifies no approver). The migration header, route comments, decision log and PR body now say so instead of claiming otherwise. Proof of store control is a follow-up. - Every path that parks a pending row also wipes the store metadata the probe staged, so a refused handshake leaves nothing of the store behind. - A duplicate callback POST is a 200 no-op instead of a 409, so the status code no longer tells the state holder whether the merchant has approved. - The expiry message tells the user to remove the unused key in the store. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LCnbsjSYtD5uwo7ZqJAMQz * fix(woocommerce): carry the handshake TTL in the activation flip, wipe metadata on denial Re-verification of the skeptic fixes found two gaps: - The initiator can open the return URL early, so a row confirmed at minute one still flipped when the keys landed hours later; the callback no longer refuses stale rows, so nothing bounded that. The conditional activation update now also requires created_at within the TTL. The callback still answers 200 (no store-side wp_die); the flip matches zero rows and the sweep parks the row. Covered by a pg-real case with both signals present on a 20-minute-old row. - The store-denied path parked the row without clearing the staged store metadata. It now wipes the same five columns as every other parking path. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LCnbsjSYtD5uwo7ZqJAMQz * chore(migrations): move the WooCommerce activation gate to 20260907143000 after main took 20260907100000 Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LCnbsjSYtD5uwo7ZqJAMQz * fix(woocommerce): make browser_confirmed_at server-only, finish replayed callbacks, budget the cron sweep Review round on PR #2375: - Superagent P1: browser_confirmed_at was member-writable through the row-scoped RLS policy, so any writer of the company could supply the initiator's signal on a colleague's pending row. New migration 20260907150000 adds a trigger keyed on the JWT role claim (same pattern as enforce_company_writer_role): end-user sessions cannot insert or update the column, service role and migrations pass. Manual key entry now inserts on the service client with company_id/user_id from the verified context. pg-real covers refusal on insert and update plus the server path. - CodeRabbit: a replayed callback for an already-keyed row now runs the activation flip instead of returning early, so a callback cut off between staging and activating is completed by its retry. - CodeRabbit: the cron deadline is fixed before the stale-handshake sweep, so the sweep counts against the route's maxDuration budget. - CodeRabbit: the activation CHECK is added NOT VALID (rows were already conformed by the backfill) and validated in 20260907150000 under the weaker lock. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LCnbsjSYtD5uwo7ZqJAMQz * fix(woocommerce): make activation itself server-only, install the trigger before validating the gate Second review round on PR #2375: - CodeRabbit: an authenticated company member could still UPDATE ... SET status = 'active' on a fully staged row through PostgREST; the CHECK only proves both signals exist, and the 15-minute TTL lives in the server's conditional activation update. The server-only trigger now also refuses any end-user transition into 'active' (insert or update). Leaving 'active' (disconnect, supersede, revoked-key marking) stays member-writable. pg-real covers an expired, fully staged row: 42501 from a user session, then a member disconnect after the server activates. - Superagent P2: the VALIDATE CONSTRAINT now runs after the trigger is installed, so the gate is never enforced while its signal is still member-writable. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LCnbsjSYtD5uwo7ZqJAMQz --------- Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
58 lines
2.9 KiB
SQL
58 lines
2.9 KiB
SQL
-- WooCommerce activation gate: an ACTIVE connection requires BOTH the
|
|
-- store-verified credentials (server-to-server wc-auth callback) AND the
|
|
-- initiating user's browser confirmation (the return leg, session-bound).
|
|
--
|
|
-- Before this, the callback alone flipped a row to active: a connection could
|
|
-- go live headless, with nobody's session involved, and an abandoned handshake
|
|
-- stayed active (feed on) forever. browser_confirmed_at records the session-
|
|
-- bound confirmation of the initiating user. The CHECK makes "active implies
|
|
-- stored keys and a recorded confirmation" a database invariant instead of an
|
|
-- application promise: staged credentials live on PENDING rows, and every
|
|
-- consumer selects status = 'active'.
|
|
--
|
|
-- Scope: this does not authenticate the person who approved in the store.
|
|
-- wc-auth delivers keys server-to-server and its redirect carries nothing
|
|
-- that identifies the approver, so a store admin who approves a link the
|
|
-- initiator generated still connects their store to the initiator's company.
|
|
-- The column is member-writable through RLS like the rest of the row; it is a
|
|
-- completion record, not a trust boundary.
|
|
|
|
alter table public.woocommerce_connections
|
|
add column browser_confirmed_at timestamptz;
|
|
|
|
comment on column public.woocommerce_connections.browser_confirmed_at is
|
|
'Set when the initiating user''s browser session confirmed the wc-auth handshake (return leg) or when keys were entered manually under a session. Required, together with stored credentials, for status = active.';
|
|
|
|
-- Active rows without stored credentials cannot sync (credentialsOf() throws)
|
|
-- and would violate the invariant below: park them so the panel says why.
|
|
update public.woocommerce_connections
|
|
set status = 'error',
|
|
error_message = 'Anslutningen saknar API-nycklar. Anslut butiken igen.',
|
|
oauth_state = null
|
|
where status = 'active'
|
|
and (consumer_key_encrypted is null or consumer_secret_encrypted is null);
|
|
|
|
-- Rows activated under the old flow completed the handshake in a browser; the
|
|
-- return leg just did not record it. Backfill from the activation timestamp.
|
|
update public.woocommerce_connections
|
|
set browser_confirmed_at = coalesce(connected_at, created_at)
|
|
where status = 'active'
|
|
and browser_confirmed_at is null;
|
|
|
|
-- NOT VALID: enforced for every new and updated row from this statement on,
|
|
-- without the full-table scan under ACCESS EXCLUSIVE that a plain ADD
|
|
-- CONSTRAINT takes. The two UPDATEs above already made every existing row
|
|
-- conform; 20260907150000 runs VALIDATE CONSTRAINT under the weaker lock.
|
|
alter table public.woocommerce_connections
|
|
add constraint woocommerce_connections_active_requires_both_signals
|
|
check (
|
|
status <> 'active'
|
|
or (
|
|
consumer_key_encrypted is not null
|
|
and consumer_secret_encrypted is not null
|
|
and browser_confirmed_at is not null
|
|
)
|
|
) not valid;
|
|
|
|
NOTIFY pgrst, 'reload schema';
|